实时双模光电跟踪系统设计

基于凝视红外成像理论、电视摄像理论及自动目标跟踪算法的最新进展,提出了一种实时双模光电跟踪系统,论述了该系统的组成和工作原理以及实现的功能,并阐述了系统各组成部分的主要设计思想,给出主要技术指标的估算方法以作为系统设计的理论依据,同时也可作为系统综合性能的评估标准。     

某高性能激光测距机总体设计与分析

针对某型激光测距机的高性能要求,在总体设计中采用多发散角分档可调、恒比定时鉴别和厘米级高分辨率计数器等项技术和措施,对激光测距作用距离、回波率以及发散角选择进行详细计算,计算结果表明总体组成能满足指标要求。     

基于梯度迭代法的一类追逃对抗模型研究

针对一类追逃对抗问题,基于微分对策理论,建立了三维空间中的追逃对抗模型,进而得到了最优性条件和最优策略.运用梯度迭代法给出了模型的数值解,并做了实例分析.分析结果显示,该模型可以很好地应用于潜艇对潜艇、潜艇对水面舰艇等实际追逃对抗问题.     

基于Web的《机械加工工艺基础》网络课程研制

从网络课程的基本要求出发,在论述<机械加工工艺基础>网络课程设计原则的基础上,对该网络课程进行了论证和设计,包括网络课程的内容设计、结构设计、教学页面设计、导航设计及交互设计等.     

极性基团对环氧树脂基体力学性能及吸水特性的影响

研究了CYD- 128/THPA/DMP- 30 (CTD)、TDE- 85/THPA/DMP- 30(TTD)、CYD- 128/IPDA(CI)与TDE- 85/IPDA (TI)4种环氧树脂基体浇铸体的拉伸、弯曲和耐海水性能,分析了树脂、固化剂类型和分子结构对树脂基体性能的影响.结果表明,使用相同固化剂时,TDE...     

多孔介质中气体流量对流动阻力影响的实验研究

对空气在多孔介质(Pd/SiO2颗粒催化剂)中的流动阻力特性进行了冷态实验,研究了气体流量对流动阻力的影响.结果表明:催化剂厚度一定时,随着气体流量增大,多孔介质中的流动阻力也逐渐增大.经过与经典阻力计算公式对比,分析了偏差影响因素.最后,结合实验数据拟合出了适合管式反应器中流动阻力计算的半经验公式,能精确地预测颗粒填...     

I-TCP:一个高速长距离网络的AIMD算法

针对互联网中高速长距离网络上的拥塞控制问题,基于同步AIMD源在Drop-Tail网络环境下竞争带宽的网络模型,提出了一个新的AIMD拥塞控制算法,I-TCP。通过合理地设计高速和低速模式以及模式切换规则,使得该算法适合于配置到高速长距离网络,同时在传统低速网络中也具有很好的性能。仿真试验表明,I-TCP中的AIMD算法在高速长距离网络中表现出了很好的效率、公平性和网络响应性。     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

Response of masonry systems against blast loading

In this paper eight successive experimental blast tests with an increasing TNT equivalent charge weights ranging from 0.56 kg to 17.78 kg were conducted on unreinforced, ferrocemented overlay masonry and confined masonry walls. The pressure-time history caused by the blast was recorded by pressure sensors installed on the test specimen. The resulting damage pattern was observed during each test. Weak zones in the three systems of masonry were identified. Scaled distances for different damage levels in the three masonry systems were experimentally obtained. The results provide a basis for determining the response of each masonry system against blast loading. Consequently, efficiency of ferrocemented overlay ma-sonry and confined masonry was found established in mitigation against blast loads.     

几种防锈液对T52钢在酸性介质中耐蚀性的影响

研究了几种防锈液对T52(10Ti热)钢在Ph=5.0酸性水溶液中耐蚀性能的影响.用线性极化和交流阻抗法对这些防锈液的耐蚀性能进行了综合评估,试验结果表明:亚硝酸钠类、含氨基和羧基的有机化合物类两种防锈液的耐蚀性能较好;并用动电位扫描法对上述防锈液的作用机理进行了初步探讨,试验表明:上述防锈液主要是抑制电极的阳极过程.